AQUA MIX GROUT HAZE CLEAN-UP is a safe and effective concentrated cleaner that is added to the final bucket of grout cleanup water for removal of cementitious grout haze and latex additive film from tile during the grout cleanup process. It may also be used full-strength to remove light grout residue within the first 10 days after grouting.
DESCRIPTION:
AQUA MIX GROUT HAZE CLEAN-UP is a safe and effective concentrated cleaner that is added to the grout cleanup water for removal of cementitious grout haze and latex additive film from tile during the grout cleanup process. It may also be used full-strength to remove light grout residue within the first 10 days after grouting.
Aqua Mix No VOC (Volatile Organic Compound Formulas) help provide better indoor and outdoor air quality compared to similar traditional products.
USES:
Unpolished natural stone (such as granite, limestone, marble, slate, and travertine), polished granite and slate, ceramic, porcelain, quarry, saltillo, terra cotta, cement pavers, masonry surfaces, and other stone and tile surfaces.
TEST A SMALL AREA:
According to application instructions to determine desired results.
APPLICATION:
DURING GROUT CLEANUP:
1) Read entire label before using.
2) Perform grout cleanup per grout manufacturer’s instructions.
3) During final grout cleanup rinse, mix a minimum of 3 ounces (90 ml) of Grout Haze Clean-Up per gallon (3.8 L) of water.
4) Wet a grout sponge or terry cloth towel with the cleaning solution, wring out excess liquid.
5) Wipe diagonally across the tile.
6) Repeat steps 4 and 5 every 10 to 15 sq. ft. (.9 m2 to 1.3 m2) or as necessary.
7) Remove residual cleaning solution using a clean grout sponge or terry cloth towel dampened with clean water only.
AFTER GROUT CLEANUP - WITHIN 10 DAYS OF GROUTING:
1) Use full-strength if grout haze was not completely removed during grout cleanup.
2) Apply directly to surface and agitate with white nylon scrub pad or brush.
3) Allow product to dwell for 5 to 10 minutes for stubborn areas or heavier grout residue.
4) Rinse with clean water to remove residual cleaning solution.
LIMITATIONS:
• Do not allow product to come in contact with any
non-recommended surface.
• Do not use on polished marble or any other acid-sensitive
tile or stone.
• Do not use excessive amounts of water during cleanup process as grout pigment may be washed out.
HANDLING AND STORAGE:
• Close container tightly after each use.
• Store in original container only.
• Store and use between temperatures of 40 ºF and 90 ºF
(4 ºC and 32 ºC).
CAUTION:
MAY BE HARMFUL IF SWALLOWED. MAY IRRITATE EYES AND SKIN. Wear skin and eye protection. Contains EDTA acid, sodium tripolyphosphate, trisodium citrate dihydrate, and Beta-Alanine, N -(2-carboxyethyl)-N-(2-ethylhexyl)-monosodium salt. If in eyes, flush with water for at least 15 minutes. If on skin, wash with soap and water. If irritation persists, seek medical attention. If swallowed, DO NOT induce vomiting. Seek medical attention.
KEEP OUT OF REACH OF CHILDREN
Limited Product Warranty Custom Building Products (“Custom”) warrants to the original consumer purchaser that its product shall be free from defects in material and workmanship under normal and proper usage for a period of one year following the date of original purchase. Custom’s sole liability under this warranty shall be limited to the replacement of the product. Some states, countries or territories do not allow the exclusion or limitation of incidental orconsequential damages, so the above limitation or exclusion may not apply to you. This warranty will not extend to any product which has been modified in any way or which has not been used in accordance with Custom’s printed instructions. Custom makes no other warranties either expressed or implied. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or from one country/territory to another.
COVERAGE:
Approximately 2,400 to 4,800 sq. ft. (223 m2 to 446 m2) per gallon (3.8 L) depending on dilution.
MSDS
Sign In
